Montane Spine Pull-On

Super breathable minimalist trail shell
262g Weight (approx)
Code: MSPPO
  • $380.00

Description

The Spine Pull-On has been engineered with GORE-TEX® ACTIVE SHELL 30D using the lightest weight construction and design features to enhance breathability.

Loading...

CONSTRUCTION

  • Constructed from 30 Denier GORE-TEX® ACTIVE SHELL fabric
  • 12 – 13 stitch count on all seams versus a typical industry average of 8
  • 3mm seam allowance on all seams

FEATURES

  • Trail pack compatible rear venting ‘fins’ allow heat and vapour to escape but prevent weather entry
  • Engineered with minimal seams for reduced weight
  • Darts used to tailor shape and articulation
  • Tailored to be worn over low bulk baselayer or mid-layer
  • Fitted trail hood with laminated peak, designed to fit closely over headwear
  • Adjustable face aperture with internal cord exits
  • Rear pre-elasticated volume reduction which expands to fit
  • Mid-height collar offers increased weather protection
  • YKK matte AquaGuard® zipped chest pocket, designed to fit GPS or mobile phone securely
  • Ergonomic lightweight zip pullers
  • Deep YKK matte AquaGuard® front zip with internal storm flap
  • Microfleece lined chin guard
  • Ergonomic lightweight zip pullers
  • Pre-elasticated cuffs with shaping over the hand
  • Close fitting pre-elasticated rear waist
  • Adjustable drawcord hem n has been engineered with GORE-TEX® ACTIVE SHELL 30D using the lightest weight construction and design features to enhance breathability.

CONSTRUCTION

  • Constructed from very lightweight and breathable 30 Denier GORE-TEX® ACTIVE SHELL fabric
  • 12 – 13 stitch count per inch on all seams versus a typical industry average of 8, creating a tight, clean and strong seam
  • 3mm seam allowance on all seams, reducing weight and bulk under the micro-tape and creating a smooth, strong seam

PATTERNING AND DESIGN

  • Engineered with minimal placement of seams, using darts instead to tailor shape and articulation to reduce weight and bulk
  • Tailored specifically to be worn over lightweight and low bulk baselayer or mid layer

HOOD CONFIGURATION

  • Fitted trail hood designed to fit closely over trail headwear
  • Adjustable face aperture with internal cord exits
  • Rear pre-elasticated volume reduction which expands to fit
  • Laminated hood peak for a stable yet supple fit
  • Mid-height collar for more protection when needed

VENTS

  • Rear vented ‘fins’ have been positioned clear of trail pack restriction and offer high levels of weather protection whilst allowing heat and vapour to escape

POCKET CONFIGURATION

  • YKK matte AquaGuard® zipped chest pocket, designed to fit GPS or mobile phone without bounce during movement
  • Ergonomic lightweight zip pullers make use easier when wearing gloves

CENTRE FRONT ZIP

  • Deep YKK matte AquaGuard® highly water resistant front zip is two way so it can be unzipped from the bottom for ventilation
  • Internal storm flap behind centre front zip for increased weather protection
  • Roll over beardguard lined with brushed fine microfleece is comfortable next to the mouth and chin

CUFF AND SLEEVES CONFIGURATION

  • Pre-elasticated cuffs with shaping over the hand to lock out wind and rain

WAIST AND HEM CONSTRUCTION

  • Pre-elasticated rear waist expands to fit whilst allowing a close body fit
  • Adjustable hem with cinchable drawcord

FURTHER FEATURES

  • Rear external MONTANE® hang loop

GORE-TEX® ACTIVE shell

Be the first to review Montane Spine Pull-On. Write a review
Top